Driving backwards
Contents
Backing up, parking, reversing
The claim that DC cars cannot reverse is essentially false.
DC-Car is a controller for car systems. Faller, Mader, etc.
These vehicles cannot follow the wire/magnet backwards using normal steering controls.
Control of the direction of travel
However, the DC car control can reverse the motor’s polarity.
The easiest way to do this is with a relay that can be switched with 3-5 volts.
There are many options for operation.
1.
If the sound output is not used, you can use the
Front flasher operation this connection can be used. This can be done with a handheld transmitter (front flasher/sound), function module/decoder (front flasher/sound) and digital center F6.
2. The front flasher output next to the transistor for the relay with digital control For this purpose, the CV100=7 tram is set up. Now the change in direction works with the switch through the digital center. Change of direction
With model railway programs such as Windigipet, iTrain and others
Both connection types can be used for control.
Steering guidance
Some examples in the video with subtitles.
DC-Car Lenkspur für Rückwärts
with special steering (example)
Reversing can also be achieved around curves thanks to switchable steering.
This was demonstrated at the meeting in Switzerland Langenthal..
No further information!
Video mit spezieller Lenkung
Connection to DC07/DC10...
DC07/10-SI relay 3-5 volt NiMH battery
DC07/10-I relay 3 volt LiPo battery
CV100=7 oder CV38=255 | Standarteinstellung |