VT

VT-TINY VTL-Tiny

Usable for:

• Stop sign
  
• Priority control
  
• Construction sites
  
• Bottlenecks
  
• Parking stop / bus stop
  
• Priority control left turn VTL

The Vorstststiny can be used with DC-Car to control the traffic.
If a vehicle drives over a sensor (reed switch, Hall sensor HG1, IR sensor), an IR stop signal is generated for an adjustable time. So this Verkehrsregelungstiny can also be referred to as construction sites, Engstellentiny or Baustellentiny 'The stop signal of the VTL only reacts to vehicles with the left turn signal switched on.'

Partlist

to use with für 5 Volt IC2 = VT Tiny C1 + C5 = Tantalcapacitor 4,7uF/16 Volt C3 + C4 = Tantalcapacitor 1uF/16 Volt R1 = Resistanz for IR-LED 150 - 680 Ohm R2 = Resistanz 50K R4 = Resistanz 270 Ohm R6 = Resistanz 100 Ohm senkrecht eingelötet R7 = Resistanz 10K	expantion for 12 V D1 = 1N4001 Diode IC1 = 78S05 Powerreglar C2 = Elko 470uF / 35 Volt Parts: 8 pin 2,54mm 4 pin for power IR-LED Reedkontact / Taster / Hallsensor HG1 Power 12 V =

Ready to work VTF und VFIRF ist not dem same as a kit!

  Attention: FTR-+


www.DC-Car-Shop.eu