Latest revision as of 01:07, 4 September 2019

The properties of the LoDi-TrainSpeed ​​

   Measuring device for trains, locomotives, cars...
   suitable for all track sizes
   Tolerance measurement with deviation detection during the measuring process.
   Length measurement of locomotives and trains possible.
   μCon-Bus compatible and backwards compatible to μCon-Manager.
   No heavy installation, just plug in the cable and put it next to the test track.
   Installation also possible under the track.
   Up to 3 TrainSpeed ​​can be operated consecutively.
   External LED connections available.

LEDs and buttons on LoDi-TrainSpeed ​​

The LoDi-TrainSpeed ​​has 2 LEDs that tell you when the sensor is measuring or ready.

If the red LED is flashing, a measuring process is taking place. The green LED will light if the device is ready for use.
Button for address: Each μCon-Bus device receives its own address via which it can report back within the bus.
Jumper: this jumper must be plugged in if you want to install a second LoDi-TrainSpeed ​​right after the first one.

Manufaktur