Difference between revisions of "Inputprint"

From wiki-en
Jump to: navigation, search
m
 
(9 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
[[File:S_Vorsatz_Anschluss_EN.png|right|400px]]
 
[[File:S_Vorsatz_Anschluss_EN.png|right|400px]]
−
==Anwendung [[File:Adobe_PDF_file_icon.png|link=http://www.modellautobahnen.de/pdf/Schaltervorsatz2.pdf]]DE==
+
==Input print for servo- and traffic light decoder==
 +
 
 +
To operate the servos manually or via Hall sensors, reed switches, etc. we have the optional Input print available.<br>
 
<br>
 
<br>
−
==Switchboard for Servo- und traffic light decoder==
 
−
The servo decoder from DC-Car (MoBa-Claus) can also be operated with a PC via the RS232 port.<br>
 
−
Besides the progamm for the servo decoder, the CD also includes a program for operating the servos by mouse or keyboard.<br>
 
−
With self-written programs it is feasible to implement some time-automatic sequences.<br>
 
 
<br>
 
<br>
−
As another option for connecting to this interface is the so called switchboard.<br>
 
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 +
The Processor gets the signals from a switch, reedswitch, Hallsensors or IR-Sensoren from (MINUS) and deliver the commands to the servo decoder.<br>
 
<br>
 
<br>
 
<br>
 
<br>
−
The Prozessor get the signals from switch, reedswitch, Hallsensors or IR-Sensoren from (MINUS) and take it over RS232-chip to the connetion from the Servodecoder.<br>
 
 
<br>
 
<br>
 +
All settings for the servos are programmed with the programmer over the PC, called Servo programmer it can be downloaded for free. The communication from PC to servo decoders is done by RS232 or USB (via USB convertor). <br>
 
<br>
 
<br>
 
<br>
 
<br>
−
The positions off the servos are controlled with the programmer over the PC. <br>
 
 
<br>
 
<br>
−
<br>
 
−
<br>
 
−
<br><br>
 
 
<br><br>
 
<br><br>
 
<br><br>
 
<br><br>
 
<br>
 
<br>
 +
The servo decoder from DC-Car (MoBa-Claus) can also be operated with a PC via the RS232 port.<br>
 +
Besides the progamm for the servo decoder, the CD also includes a program for operating the servos by mouse or keyboard.<br>
 +
With self-written programs it is feasible to implement some time-automatic sequences.<br>
  
−
==Anschluss==
 
 
===Controlled Servodecoders S4 and S8===
 
===Controlled Servodecoders S4 and S8===
−
[[File:S_Vorsatz_Bestueckung_neu.png|350px]]<br>
+
[[File:S_Vorsatz_Bestueckung_neu.png|400px]]<br>
  
 
===Controlled Servodecoder W4===
 
===Controlled Servodecoder W4===
−
[[File:S_Vorsatz_W4.png|350px]]<br>
+
[[File:S_Vorsatz_W4.png|400px]]<br>
  
−
===Controlled Ampeldecoder===
+
===Controlled Traffic_signal_decoder===
−
[[File:Schaltervorsatz_Ampel.png|350px]]<br>
+
[[File:Schaltervorsatz_Ampel.png|400px]]<br>
 
<table Border="1">
 
<table Border="1">
 
<tr>
 
<tr>
Line 47: Line 43:
 
</tr>
 
</tr>
 
</table>
 
</table>
−
<br><br><br><br><br><br><br>
+
<br><br><br><br><br>
 +
<br>
  
−
==Kitmanual==
+
==Instruktions==
 
siehe [[Kit contruction inputprint]]
 
siehe [[Kit contruction inputprint]]
−
[[Servodecoder]]  [[Trafficlightdecoder]]<br>
+
[[Servodecoder]]  [[Traffic_signal_decoder]]<br>
 
==Ation==
 
==Ation==
 
Hallsensors and R-Sensoren need a +5V connetion.<br>
 
Hallsensors and R-Sensoren need a +5V connetion.<br>
Line 59: Line 56:
 
<table border=1>
 
<table border=1>
 
<tr><td>
 
<tr><td>
−
S8DCC/MOT ab 02.01.09 </td><td>&nbsp;</td><td>W4DCC/MOT ab 26.04.09</td></tr>
+
S8DCC/MOT up 01-02-2009 </td><td>&nbsp;</td><td>W4DCC/MOT up 26-04-2009</td></tr>
 
<tr><td>
 
<tr><td>
−
S4DCC/MOT ab 21.10.08 </td><td>&nbsp;</td><td>Ampeldecoder ab 10.10</td></tr>
+
S4DCC/MOT up 10-21-2008 </td><td>&nbsp;</td><td>Traffic_signal_decoder up 10-2010</td></tr>
 
</table>
 
</table>
−
1. [[File:S8-W4.png|180px|Bild S8-W4.png]] 2. [[File:Master_Bruecke.png|180px|Bild Master_Bruecke.jpg]]<br>
+
1. [[File:S8-W4.png|180px|S8-W4.png]] 2. [[File:Master_Bruecke.png|180px|Master_Bruecke.jpg]]<br>
 
<br>
 
<br>
 
<br>
 
<br>
  
−
[[File:S8undHS_zusammengesteckt.jpg|250px|S8 and IP together]]<br>
+
[[File:S8undHS_zusammengesteckt.jpg|290px|S8 and IP together]]<br>
 
<br>
 
<br>
 
One screw is removed from the plug and the socket.<br
 
One screw is removed from the plug and the socket.<br
 
Then the assemblies can be plugged together and the ground connection is still given
 
Then the assemblies can be plugged together and the ground connection is still given
 
If the switch is installed in a switchboard for the pushbuttons, a standard RS232 extension cable can be used
 
If the switch is installed in a switchboard for the pushbuttons, a standard RS232 extension cable can be used
−
<br><br><br>
+
<br>
−
==Weichenstrasse==
+
<br>
 +
<br>
 +
<br>
 +
<br>
 +
<br>
 +
 
 +
 
 +
==many servos with one switch==
 
[[File:weichenstrasse.png|450px]]<br>
 
[[File:weichenstrasse.png|450px]]<br>
 
One switch can be used to operate several points simultaneously<br>
 
One switch can be used to operate several points simultaneously<br>
Line 80: Line 84:
 
remote from the servo decoder.<br>
 
remote from the servo decoder.<br>
  
−
[[Servodecoder]] <br> [[:category:Traffic_signal_decoder|Traffic_signal_decoder]]<br><br>
+
[[Servodecoder]]   
−
[[Category:DC-Car-System]] [[Category:Servodecoder]] [[Category:Errorlist]]
+
[[:category:Traffic_signal_decoder|Traffic_signal_decoder]]
 +
[[Category:DC-Car-System]]  
 +
[[Category:Errorlist]]
 
[[Category:Source_of_supply_US]]
 
[[Category:Source_of_supply_US]]
 
[[Category:Source_of_supply_UK]]
 
[[Category:Source_of_supply_UK]]
 
[[Category:Index_US]]
 
[[Category:Index_US]]
 
[[Category:Index_UK]]
 
[[Category:Index_UK]]
−
[[Category:Index_DE]]
+
[[Category:Servodecoders]]
 
[[Category:Wiring diagram]]
 
[[Category:Wiring diagram]]

Latest revision as of 18:55, 25 December 2017

S Vorsatz Anschluss EN.png

Input print for servo- and traffic light decoder

To operate the servos manually or via Hall sensors, reed switches, etc. we have the optional Input print available.






The Processor gets the signals from a switch, reedswitch, Hallsensors or IR-Sensoren from (MINUS) and deliver the commands to the servo decoder.



All settings for the servos are programmed with the programmer over the PC, called Servo programmer it can be downloaded for free. The communication from PC to servo decoders is done by RS232 or USB (via USB convertor).








The servo decoder from DC-Car (MoBa-Claus) can also be operated with a PC via the RS232 port.
Besides the progamm for the servo decoder, the CD also includes a program for operating the servos by mouse or keyboard.
With self-written programs it is feasible to implement some time-automatic sequences.

Controlled Servodecoders S4 and S8

S Vorsatz Bestueckung neu.png

Controlled Servodecoder W4

S Vorsatz W4.png

Controlled Traffic_signal_decoder

Schaltervorsatz Ampel.png

123-1011+12131415161718
+ 5 V Out- GroundTrafficlight A - DCall LightNightNothaltStart BStart Aauto, offauto. off
green red







Instruktions

siehe Kit contruction inputprint Servodecoder Traffic_signal_decoder

Ation

Hallsensors and R-Sensoren need a +5V connetion.
The left connector is 5V

use the servodecoder: with Extanionsconnector

S8DCC/MOT up 01-02-2009  W4DCC/MOT up 26-04-2009
S4DCC/MOT up 10-21-2008  Traffic_signal_decoder up 10-2010

1. S8-W4.png 2. Master_Bruecke.jpg


S8 and IP together

One screw is removed from the plug and the socket.<br Then the assemblies can be plugged together and the ground connection is still given If the switch is installed in a switchboard for the pushbuttons, a standard RS232 extension cable can be used






many servos with one switch

Weichenstrasse.png
One switch can be used to operate several points simultaneously
The resistances should be 4.7 K and the diodes should be 1N4148
A control unit can be equipped with an RS232 cable (9-pin sub-D extension)
remote from the servo decoder.

Servodecoder Traffic_signal_decoder

Retrieved from "http://dc-car.de/wiki_en/index.php?title=Inputprint&oldid=3541"