RmS88
From wiki-en
S88-Feedback module
This feedback decoder has 16 inputs which are connected to ground.
1 Occupied/free
2 Occupied/free
3 Occupied/free
...
16 Occupied/free
This may be:
- The axles of a train
- Reed switches that are triggered magnetically
- Switches which are operated by hand
- Relay contacts of circuits
- Electronics, such as traffic light decoders, which switch to minus.
With 16 contacts you can recognize 16 feedbacks.
The decoder is also available in the IR version. Then phototransistors are required as sensors.
But that only works with the feedback signal from DC-Cars.
IR LEDs on the back (used for anti collision), side or bottom