Lane Control
Lane selection
Passing
In order for DC-Cars to be able to drive past other DC-Cars, distance control must be switched off.
This is possible with the automatic bus CV100=14 or the automatic fire brigade CV100=10 in the parking positions
by 2nd magnet or 2 command from function decoder
Overhaul
However, in multi-lane traffic, such as on the Autobahn, the distance control has to be switched on and off.
With the function
- F3 (front distance control)
- F13 (rear distance control)
on the digital system
or use a function decoder to switch it off.
This makes it possible to stop individual vehicles (rear IR off).
This is difficult with moving vehicles.
With a PC control you can drive in blocks to prevent a collision.
(E.g. at the exhibition facilities in Zagreb with Windigipet control)
Lane control
right|300px Lane control
Lane assistant
Another option is available with the DC car decoders from June 2023.
Lanes can be assigned to a DC car.
The thing about:
- the Handheld transmitter on June 2023 MSL
- Function decoder FUSW from June 2023
- Basic setting CV183 (default = 0, lane 1 right = 1, lane 2 middle = 2, lane 3 left = 4, lane 4 special lane = 8)
| DC-Car Truck DC04-DC10 without track CV184=0 | DC-Car Trailer DC04A-DC07A | Track 1 (CV184=1) | Track 2 CV184=2 | Track 3 (CV184=4) | Track 4 (CV184=8) | |
| DC-Car Truck old decoder | STOP | STOP | STOP | STOP | STOP | STOP |
| Lane 1 right | STOP | STOP | STOP | Ride | Ride | Ride |
| Track 2 middle | STOP | STOP | Ride | STOP | Ride | Ride |
| Lane 3 left | STOP | STOP | Ride | Ride | STOP | Ride |
| Track 4 Special | STOP | STOP | Ride | Ride | Ride | STOP |
