Difference between revisions of "CV27"
m |
m (→CV27 Technical Basics) |
||
| Line 7: | Line 7: | ||
Switch functions on or off<br> | Switch functions on or off<br> | ||
0 = Normal function<br> | 0 = Normal function<br> | ||
| − | 1 = | + | 1 = Battery test pin switched off (more at CV21)<br> |
| − | 2 = MF3 is used as | + | 2 = MF3 is used as function switching output 1 and thus the headlight sensor connection is switched off, control of the switching output with function key F10 of a DCC control center <br> |
| − | 4 = | + | 4 = Blue light is placed on F3, Front flasher is placed on F4. F5 and F6 have no function<br> |
8 = Reed contact connection switched off<br> | 8 = Reed contact connection switched off<br> | ||
16 = DC-CAR Plus function: The function block outputs "Driving light 1 OFF" also switch off lights 2, 3 and 4<br> | 16 = DC-CAR Plus function: The function block outputs "Driving light 1 OFF" also switch off lights 2, 3 and 4<br> | ||
32 = DC-CAR Plus function: The function block outputs "Driving light 1 OFF" switch the entire lighting OFF (Blue light, etc.)<br> | 32 = DC-CAR Plus function: The function block outputs "Driving light 1 OFF" switch the entire lighting OFF (Blue light, etc.)<br> | ||
| − | 64 = DC-CAR Plus function: The | + | 64 = DC-CAR Plus function: The turn light command of functions module are coupled. By switching on turn signal left and turn signal right the warning light is switched on.<br> |
| − | 128 = Reed contact reverse polarity (Reed contact closed = vehicle stop, reed contact = vehicle drive) <br> | + | 128 = Reed contact reverse polarity (Reed contact closed = vehicle stop, reed contact open = vehicle drive) <br> |
<br> | <br> | ||
Revision as of 21:17, 20 November 2017
CV27 Technical Basics
current list in this WIKI
current list as PDF Download
CV-List DC07/DC08
Switch functions on or off
0 = Normal function
1 = Battery test pin switched off (more at CV21)
2 = MF3 is used as function switching output 1 and thus the headlight sensor connection is switched off, control of the switching output with function key F10 of a DCC control center
4 = Blue light is placed on F3, Front flasher is placed on F4. F5 and F6 have no function
8 = Reed contact connection switched off
16 = DC-CAR Plus function: The function block outputs "Driving light 1 OFF" also switch off lights 2, 3 and 4
32 = DC-CAR Plus function: The function block outputs "Driving light 1 OFF" switch the entire lighting OFF (Blue light, etc.)
64 = DC-CAR Plus function: The turn light command of functions module are coupled. By switching on turn signal left and turn signal right the warning light is switched on.
128 = Reed contact reverse polarity (Reed contact closed = vehicle stop, reed contact open = vehicle drive)
