The drive combines motor and gearbox into one unit.
GL1-46-7 for vehicle wheels from 10.5 Height
'GL1-26-7' available from 7/2012:
This quiet, low-maintenance drive incorporates a 7 mm motor.
For tire size from 6 mm, the drive for models up to 70 grams is intended.
For tires over 8 mm, the weight should not exceed 50 grams
Motor: 7 mm approximately 25 mA at 1.2 volts at idle, a maximum of 300 mA
with 1.2 volts it is suitable for Oldtimer (65km / h)
with 2.4 volts operated it is faster than standard Faller® models (98 km / h)
(Speed information 1/87 scale with 10 mm wheels)
Ideal for very fast emergency vehicle
To reduce the speed, the following can be undertaken:
Use only one NiMH rechargeable battery = 1.2 volts.
A diode 1N4001 reduces the battery voltage to the motor by about 0.7 volts
A Schottky Diode reduces the battery voltage to the motor by about 0.4 volts
With CV5 the maximum speed can be adjusted in the decoder.
It should be noted that the difference between CV2 and CV5 should be at least 70.
If the value is small, the distance control can no longer regulate properly.
For smooth running ensure that the motor points in the direction of travel.
Storage temperature +5 to +40 degrees
Operating +15 to +35 degrees
Humidity max. 60%
Aluminum housing with interchangeable bushings made of copper
These bushings have proved their worth, as they take up no dirt
Design with a worm and a worm (helical) of plastic (German production)
low wear, low maintenance
The transmission shows its durability on many exhibitions and show performances in daily use.
There are almost all vehicles with the DC-Car decoders in use
7 days a week and up to 10 hours per day
Available is also a car version with the reduction of 21: 1 and a 6 mm Motor
This gearbox has no case to have more freedom during installation.
Other transmissions are available through GLCE:
GL1-26-7 the oldtimer with 10 mm wheels
Speed reduction with a diode