CVs

CVlist feb 2017

CV	Default	CV-Text	Value
CV1	1	DCC - Short Address	1-126
CV2	20	Speed at speed step 1	3-140
CV3	2	DCC - Second short address	1-126
CV4	0	Not used	0
CV5	168	Speed at speed step 28	31-168
CV6	0	Not used	0
CV7	0	Version (Read only)	0
CV8	0	Manufacturer (Read only)	0
CV9	0	Not used	0
CV10	0	Not used	0
CV11	0	Switch address (high value/part) servo 1	0-7
CV12	1	Switch address (low value/part) servo 1	0-255
CV13	0	Switch address (high value/part) servo 2 or steering	0-7
CV14	2	Switch address (low value/part) servo 2 or steering	0-255
CV15	7	Second Long-DCC address higher part	0-39
CV16	209	Second Long-DCC address lower part (Default address is 2001)	0-255
CV17	7	Long-DCC address higher part	0-39
CV18	208	Long-DCC address lower part (Default address is 2000)	0-255
CV19	0	Functions	0 -127 / 128
CV20	4	Outputs MF1, MF2 and blue lights	0-255
CV21	0	DC -Car advanced functions	0-255
CV22	0	Not used	0
CV23	0	Sound and Headlight control	0-3
CV24	0	Lights that are activated when vehicle is first turned on	0-255
CV25	1	Configuration of MF4 / MF5 / active feedback by IR	0 - 255
CV26	0	Actions when low battery occur and watchdog	0 - 51
CV27	3	On and Off functions	0-255
CV28	112	Reference value for the battery test	40-250
CV29	0	Short or long DCC-Address	0 oder 32
CV30	90	Left turn signal time	0,0 - 255
CV31	90	Right turn signal	0,0 - 255
CV32	21	Timing blue flashing light 3 (CV57=0)	0 - 255
CV33	78	Blue flashing light 3 off period	1 - 254
CV34	23	Timing blue flashing light 1 (CV57=0)	0 - 255
CV35	76	Blue flashing light 1 off period	1 - 254
CV36	19	Timing blue flashing light 2 (CV57=0)	0 - 255
CV37	70	Blue flashing light 2 off period	1 - 254
CV38	7	Front flash time 1 on period	1 - 255
CV39	32	Front flash time 2 off period	1 - 254
CV40	9	Front flash time 3 on period	1 - 254
CV41	150	Front flash time 4 off period	1 - 254
CV42	2	Lower threshold of light sensor (high value)	0 - 3
CV43	96	Lower threshold of light sensor (low value)	0 - 255
CV44	2	Upper threshold of light sensor (high value)	0 - 3
CV45	168	Upper threshold of light sensor (low value)	0 - 255
CV46	4	Braking power when speed step 0 is received from the command station	1-255
CV47	4	Braking power when vehicle in front sends STOP signal	1-255
CV48	67	Braking power when vehicle in front sends DRIVING signal	1-255
CV49	32	Braking power for reed switch	1-255
CV50	3	Wait time in 100x ms when accelleration can start after a STOP signal	1-255
CV51	1	Wait time in 100x ms when accelleration can start after a DRIVING signal	1-255
CV52	142	Faster accelleration below this value, slower above	96 - 150
CV53	50	5x ms gearshift time between each speed level increase below CV52	1 - 255
CV54	100	5x ms gearshift time between each speed level increase above CV52	1 - 255
CV55	25	Brake light duration 0.06x seconds	Mai 63
CV56	0	Starting traction force in the lowest speed step	0 oder 1
CV57	0	Blue light functions:	0 / 1 / 16 / 32/ 64
CV58	0	Speed step emitted by the rear IR-LED emitter	0, 2, 4 und 96-152
CV59	3	RESET. Decoder address reset to 1	0 - 255
CV60	0	Assignment of light outputs to function keys0	--
CV61	0	Reversing polarity of light outputs 2, 3, and 4	0 - 3
CV62	0	Not used	0
CV63	10	Duration of brake lights in 100x ms when a car approaches the rear of another	Jan 63
CV64	0	Time in 100x ms ( from zero to half speed)	1 - 254
CV65	20	Time in 100x ms ( Where the vehicle will not respond to function module / command station)	1 - 254
CV66	2	Braking power to use when receiving a lower speed step than the current one	1 - 254
CV67	2	Accelleration power to use when receiving a higher speed step than the current	1 - 254
CV68	2	Start up speed step after a stop-coil (Reed switch)	1 - 28
CV69	2	Starting behavior at turn on	0 - 28 oder 100
CV70	168	The motor speed at step 28	3 - 168
CV71	163	The motor speed at step 27	3 - 168
CV72	158	The motor speed at step 26	3 - 168
CV73	153	The motor speed at step 25	3 - 168
CV74	149	The motor speed at step 24	3 - 168
CV75	144	The motor speed at step 23	3 - 168
CV76	139	The motor speed at step 22	3 - 168
CV77	135	The motor speed at step 21	3 - 168
CV78	130	The motor speed at step 20	3 - 168
CV79	125	The motor speed at step 19	3 - 168
CV80	121	The motor speed at step 18	3 - 168
CV81	116	The motor speed at step 17	3 - 168
CV82	111	The motor speed at step 16	3 - 168
CV83	106	The motor speed at step 15	3 - 168
CV84	102	The motor speed at step 14	3 - 168
CV85	97	The motor speed at step 13	3 - 168
CV86	92	The motor speed at step 12	3 - 168
CV87	88	The motor speed at step 11	3 - 168
CV88	83	The motor speed at step 10	3 - 168
CV89	78	The motor speed at step 9	3 - 168
CV90	74	The motor speed at step 8	3 - 168
CV91	69	The motor speed at step 7	3 - 168
CV92	64	The motor speed at step 6	3 - 168
CV93	59	The motor speed at step 5	3 - 168
CV94	55	The motor speed at step 4	3 - 168
CV95	50	The motor speed at step 3	3 - 168
CV96	45	The motor speed at step 2	3 - 168
CV97	41	The motor speed at step 1	3 - 168
CV98	1	Time in which a repeated command from Function module C +2 or -2 speed steps is ignored	0 - 255
CV99	3	Lowest speed at -2 function	1 - 28
CV100	0	Vehicle Type Description	0 - 15
CV101	5	Blink time for Function module E7	Jan 63
CV102	10	Speed step that Function module E7 will apply brakes to	1 - 28
CV103	20	Waiting time in sec. for bus and emergency vehicles	0 - 63
CV104	5	Time in seconds a vehicle will blink and wait for departure.	Jan 63
CV105	10	Speed step at which a vehicle starts after the time in CV103 and CV104 has expired	1 - 28
CV106	2	Timing of turn out signal after departure of bus or emergency vehicles	Jan 63
CV107	2	Period of time which a STOP command is ignored during an automatic start.	Jan 63
CV108	10	Holding time for Function Module D1-D4	0 - 63
CV109	5	Period which flashers are on for function module D or after passing the first magnet with Hall sensor automatic mode	0 - 63
CV110	10	Starting speed step for function module D7 and D8 or after passing the first magnet with Hall sensor automatic mode	1 - 28
CV111	0	Defines MF4, Hall Sensor features	0 / 1 / 2 / 122 / 123
CV112	0	If CV111 is greater than 0 (Automatic bus function): Lights activated after passing second magnet	0 - 255
CV113	1	Vehicle Number	Jan 31
CV114	0	TBS sound module	0-1
CV115	2	Period of time which hall sensor ignores magnetic pulses 120x ms	1 - 255
CV116	0	Not used	0 - 1
CV117	0	Not used	0
CV118	0	Not used	0
CV119	0	Not used	0
CV120	0	Not used	0
CV121	0	Not used	0
CV122	0	Not used	0
CV123	0	Not used	0
CV124	2	Blue flash 1 used as double flash 1 (active when CV57=16)	0 - 255
CV125	127	OFF duration for double flash 1	1 - 254
CV126	127	Period between flashes in double flash 1 (Randomly determined)	1 - 254
CV127	2	Blue flash 2 used as double flash 2 (active when CV57=16)	0 - 255
CV128	30	OFF duration for double flash 2	1 - 254
CV129	127	Period between flashes in double flash 2 (Randomly determined)	1 - 254
CV130	2	Blue flash 3 used as double flash 3 (active when CV57=16)	0 - 255
CV131	30	OFF duration for double flash 3	1 - 254
CV132	127	Period between flashes in double flash 3 (Randomly determined)	1 - 254
CV133	2	Blue flash 4 used as double flash 4 (active when CV57=16)	0 - 255
CV134	30	OFF duration for double flash 4	1 - 254
CV135	127	Period between flashes in double flash 4 (Randomly determined)	1 - 254
CV136	20	ON duration of flashing light 4	0 - 255
CV137	75	OFF duration of flashing light 4 (CV136 and 137 must have different values)	1 - 254
CV138	25	Servo 1 speed	1 - 255
CV139	25	Servo 2 speed	1 - 255
CV140	0	Servo 1 green position 0,5 (left) - 2,5 ms (right)	44 - 200
CV141	0	Servo 1 red position 0,5 (left) - 2,5 ms (right)	44 - 200
CV142	0	Servo 2 green position 0,5 (left) - 2,5 ms (right)	44 - 200
CV143	0	Servo 2 red position 0,5 (left) - 2,5 ms (right)	44 - 200
CV144	0	Servo 1 accepts current position as green	1 - 255
CV145	0	Servo 1 accepts current position as red	1 - 255
CV146	0	Servo 2 accepts current position as green	1 - 255
CV147	0	Servo 2 accepts current position as red	1 - 255
CV148	0	Definition Assistance Servo 1 and Servo 2	0 - 255
CV149	0	Settings for servo 1 and servo 2	0 - 255
CV150	5	Repetitive movement of servo 1	Jan 63
CV151	5	Repetitive movement of servo 2	Jan 63
CV152	25	Basic counter servo 1	1 - 255
CV153	25	Basic counter servo 2	1 - 255
CV154	128	Accelerate if steep step is increasing (only valid if CV19 = 64)	1 - 255
CV155	128	Decelerate if steep step is decreasing (only valid if CV19 = 64)	1 - 255
CV156	2	Batteries (only valid if CV26 = 2 ON)	1 - 255
CV157	80	Battery capacity in 10 mAh per step. Max. 2550mAh	1 - 255
CV158	45	Driving time x 4 minutes (Factory setting 3 hours)	1 - 255
CV159	0	Define battery as fully loaded	1 - 255

Click the CV for more information.

With a CV-Programmer set value.