CV59

CV59 Reset and default Values as CV27

current list in this WIKI

current list as PDF Download
CV-List DC07/DC08

Default value: 3

Resets the decoder to the factory setting and thus back to DCC address 1.
The value is written into CV27!
Attention: The remote control via PC transmitter or booster is lost and must be set again.
See the description of CV27 and CV21

To program the CV 59 via IR, the DCC address of the decoder at the control center must be set to 1, independend which address the decoder had before, otherwise the RESET is not carried out!