Difference between revisions of "Battery test"

From wiki-en
Jump to: navigation, search
m (Set comparison values ​​with CV28)
m (Battery test)
Line 5: Line 5:
 
What to do with "battery empty" we have to set with CV26. <br>
 
What to do with "battery empty" we have to set with CV26. <br>
 
<br>
 
<br>
Note the new '' '[[: Category: CV List | CV List]]' ''. <br>
+
Note the new '''[[: Category: CV List | CV List]]'''. <br>
 
<br>
 
<br>
'' 'Set in 3 steps:' '' <br>
+
'''Set in 3 steps:''' <br>
 
[[CV26]] sets desired function for a battery alarm
 
[[CV26]] sets desired function for a battery alarm
 
<br>
 
<br>

Revision as of 17:13, 21 January 2018

Battery test

Improved and changed function in DC07 and DC08.
Since February 2014, the DC-Car decoders have been delivered with a new program.
This allows the battery test to work if CV27 is changed and CV28 is set.
What to do with "battery empty" we have to set with CV26.

Note the new CV List.

Set in 3 steps:
CV26 sets desired function for a battery alarm
CV27 activates the battery test. (disabled by default)

CV28 set limit values ​​

Set comparison values ​​with CV28

NiMH 1 cell 0.95 Volt CV28 = 50
NiMH 2 cells 1.90 Volt CV28 = 100
NiMH 3 cells 2.70 Volt CV28 = 150 PAY ATTENTION! Do not use with DC07-SI. The voltage converter is damaged.
LiPO 1 cell 3.00 Volts CV28 = 170 PAY ATTENTION! Do not use with DC07-SI. The voltage converter is damaged.
NiMH 3 cells with a diode 1N4001 2.10 Volt CV28 = 110
LiPO 1 cells with a diode 1N4001 2.30 Volt CV28 = 130

Activate the battery test with CV27

The battery test must be activated with CV27.
The wiring for the DC07-I decoders must be correct.

Set warning function with CV26

When the battery is empty, the headlights will flash with the DC05.
The driving behavior can be adjusted with CV26.

With DC07 / DC08 many things differs!
When the battery is empty, the hazard lights flash.
CV26 affects the warning behavior of the battery alarm

Value Default Modified
0/1 CV26 = 0 When the battery alarm is activated, the vehicle continues to operate.
As a result, the remaining capacity is quickly used up and the model stands in the way without warning.
CV26 = 1 When the battery alarm is activated, the vehicle stops.

During the stop, the IR transmitters will remain operational for some time.
With a drive command the vehicle can be moved step by step.

Remote control, function module, digital control panel, PC transmitter
0/2 CV26 = 0 (from DC07) Warning lights on battery warning CV26 = 2 Oud brake light and headlight flash (as for DC07)
0/4 CV26 = 0 Charge the battery as "good" or "bad" CV26 = 4 charge of the battery is transferred as a percentage to the feedback XT Possible info: 1-15 </ td>
0/8 CV26 = 0 no time limit CV26 = 8 Runtime limit of the vehicle dependent of the battery (see CVs 156 - 159)
0/16 CV26 = 0 no time limit CV26 = 16 Unlimited 4 minutes depending CV160 < /td>

By adding the values, different settings are active.
'Eg 1 + 16 = 17 Stop warning lights on the battery alarm and watchdog (CV160) after 4 minutes